Method 3: Aux Connection; Connecting An Mp3 Player - Hitachi AXS460BTU Instruction Manual

Method 3: AUX Connection

1. Use an RCA to RCA stereo audio cable (not included) or 3.5 mm to RCA stereo audio
cable (included) to connect the soundbar's AUX 1 (L/R) socket to the AUDIO OUT
sockets of the external device.
2. After connection, press
3. Press SOURCE on the unit or AUX on the remote control repeatedly to select AUX 1 to
play audio from your input device.
25V 2.6A COAXIAL
RCA to RCA Stereo Audio
Cable (not included)
TV
If the input to the soundbar is fed from the TV's headphone socket, then to prevent
speaker from going into standby it is recommended to have the TV volume set to at
least 50% of its range and to use the soundbar remote to control volume.
Ensu e to match the colours on the cable plugs o the olours on the input and output sockets. r
Please check with the manufactures instructions for compatibility.

Connecting an MP3 Player

1. Use a 3.5mm to 3.5mm stereo audio cable (not included) to connect the soundbar's
AUX 2 to the headphone socket of the external device.
2. After connection, press
3. Press SOURCE on the unit or AUX on the remote control repeatedly to select AUX 2 to
play audio from your input device.
HEADPHONE
button on the unit or remote control to switch the unit on.
Rear View of the Soundbar
OPTICAL AUX 2 R AUX 1 L
Set-top Box
Blu-ray Player / DVD
Player / Recorder
t
button on the unit or remote control to switch the unit on.
25V 2.6A COAXIAL OPTICAL
3.5mm to 3.5mm Stereo
Audio Cable (not included)
ARC HDMI2
3.5mm to RCA Stereo Audio
OR
Cable (included)
Satellite
Game
Receiver
Console
c
Rear View of the Soundbar
AUX 2 R AUX 1 L
HDMI1
Video
Camera
ARC HDMI2 HDMI1
17