Method 2: Hdmi Hub Connection - Hitachi AXS460BTU Instruction Manual

Method 2: HDMI Hub Connection

Using your Soundbar as a hub
Use this method to connect all your devices into your soundbar. If your TV is not ARC
compatible, then you will need to follow "Method 1: Optical / Coaxial Connection" to
listen to normal TV through your TV.
1. Connect an HDMI cable (not included) from your soundbar's HDMI OUT (ARC) socket
to the HDMI IN socket on your TV.
2. After connection, press
3. Press SOURCE on the unit or HDMI on the remote control repeatedly to select HDMI 1
/ HDMI 2 to play audio from your input device.
TV
The unit may not be able to decode all digital audio formats from the input source. In this case, the unit
will mute. This is NOT a defect. Ensure the audio setting of the input source (e.g. TV, game console, DVD
player, etc.) is set to PCM or Dolby AC-3 (Refer to the user manual of the input source device for its audio
setting details) with HDMI input.
For a single remote use when connected to a Hitachi TV please carry out the following:
(Please check your user manual for other manufacturers TV as this may not be the same.)
Connect HDMI cable to ARC supported HDMI port of
Set Speaker as Amplifier (Menu >> Settings>>More...>> Other Settings>> Speaker >> Amplifier)
Then whether you use TV remote control or sound bar remote control,TV speakers will be MUTE and you will
hear sound from sound bar without any problem.
After stand by on off or power off on, TV keeps last settings.
button on the unit or remote control to switch the unit on.
HDMI Cable (not included)
Rear View of the Soundbar
25V 2.6A COAXIAL OPTICAL AUX 2 R AUX 1 L
Set-top Box
Satellite Game
Receiver Console
TV set,
ARC HDMI2
Blu-ray Player / DVD
Player / Recorder
Video
Camera
HDMI1
HDMI Cable
(not included)
15