3
3
S
S
Connections
tep
tep
Ensure all units of the Soundbar are connected before connecting
to the mains power socket.
Coaxial cable
(not included)
RCA stereo audio cable
(included)
COAXIAL
TO SUBWOOFER
AUX 2
AUX 1
MP3 LINK
OPTICAL
R
L
R
L
3.5 mm stereo audio cable
Optical cable
(not included)
(not included)
4
4
5
5
S
S
S
S
Basic Operation
Connecting to the Mains Socket
tep
tep
tep
tep
Start Up
2
• In STANDBY mode, the
STANDBY indicator will light up red.
Press the
STANDBY button on the main unit or the
button on
the remote control to turn the unit on.
STANDBY button to switch the unit back to STANDBY
• Press the
To the Mains
1
mode.
Socket
• Disconnect the mains plug from the mains socket if you want to
switch the unit o completely.
TO MAIN SET
COAXIAL
TO SUBWOOFER
AUX 2
AUX 1
MP3 LINK
Selecting Modes
OPTICAL
R
L
R
L
AC~
Press the SOURCE button repeatedly to select AUX1 / AUX2 / MP3
Rear of subwoofer
LINK / COAXIAL / OPTICAL modes. Each mode’s LED indicator will
light up blue to show which mode is active.
3
Adjusting the Volume
Press the VOL + button to increase the volume.
Press the VOL – button to decrease the volume.
AUX 1
AUX 2
MP3 LINK COAXIAL OPTICAL
Red LED
indicator
EQ (Equaliser)
Press the EQ (Equaliser) button on the remote control to switch
between preset equalisers to suit individual preference.
Cycle through the preset equalisers to select the preferred sound
AUX 1
AUX 2
MP3 LINK COAXIAL OPTICAL
ambience. Standard settings (in no particular order) are Optimiser /
Front of main unit
Flat / Pop / Classic / Rock / Jazz.
T
T
Well done, your new Soundbar is now ready to use.
ip:
ip:
You will nd that there are many exciting features available. To get to know all these features, please take some time to
read the Instruction Manual provided with your Soundbar.
(P.N.: P41012303-A101)