Table of Contents
Advertisement
Linear Force SmartLead
All EMG sensors should be fully charged before a firmware update is performed.
12 Trouble Shooting, Fault Diagnosis
Symptom: Problem with the EMG Sensor recognizing the SmartLead
Possible Reason
SmartLead is disconnected or loose
Firmware in the Sensor is outdated. The EMG
Sensor Status LED may be solid Yellow.
Website Link to FAQ
Answers to common questions can be found at Noraxon's Frequently Asked Questions (FAQ)
website page at this link:
https://www.noraxon.com/support-learn/technical-support/faqs/
Other educational material is available at this link:
https://www.noraxon.com/support-learn/technical-support/
13 Service and Repair
13.1 Availability of Circuit Diagrams and Component Lists
Noraxon will make available on request circuit schematics, component parts lists and calibration
instructions to assist qualified technical personnel in the service and maintenance of the Ultium
Receiver System.
13.2 Warranty Information
Noraxon equipment including optional items is guaranteed to be free from defects in material and
workmanship for 1 year from the date of purchase. The warrant period begins on the date of
product shipment from Scottsdale, Arizona.
Warranty coverage does not apply to damage incurred through accident, alteration, abuse or failure
to follow instructions contained in this document.
P-802 Rev B (May 2019)
Remedial Action
Check that the SmartLead is inserted Fully
Sensor firmware is periodically updated to
support newly designed SmartLeads. Make
sure you have installed the latest version of
MR3 and run a firmware update if needed.
17
Advertisement
Table of Contents
