Table of Contents
Advertisement
Linear Force SmartLead
6.5 Companion Software Installation
The Ultium Linear Force SmartLead is compatible with several different software programs.
Identify the companion software that accompanied the equipment (MR3) and follow the
appropriate instructions given next.
6.5.1 MR3 Installation
1. Insert the MR3 feature map into the PC
2. A menu will automatically pop up
3. Click on "Install MR3" and follow the Wizard's instructions
4. Double click
6.6 Companion Software Configuration
Before the Ultium Linear Force can be used with the Noraxon Ultium system, the companion
software must be configured to recognize the different components that make up the system.
Refer to the Ultium system's hardware manual for instructions for the program (MR3 myoMUSCLE)
supplied with the Noraxon system. For specific settings for the Ultium Linear Force SmartLead see
below:
When assigned to a channel using the serial number, the software should automatically detect the
sensor as a Ultium Linear Force SmartLead:
P-802 Rev B (May 2019)
on the icon to start the MR3 software.
9
Advertisement
Table of Contents
