Table of Contents
Advertisement
Linear Force SmartLead
6.6.1 MR3 Configuration
P-802 Rev B (May 2019)
Step 1
Enter the Hardware Setup
screen and setup the
Noraxon EMG system in
accordance with its
provided hardware
manual.
Step 2
Click 'Detect Sensors in
Charger' (All sensors which
you would like to use must
be in the charger) – this
will add the SmartLead(s)
to the list of sensors (only
if the unique SmartLead is
connected to their
corresponding sensor). If
the unique SmartLead (ex:
Linear Force) is not
connected to the
corresponding sensor
during detection, MR3 will
assume you are using the
sensor to collect EMG
data. Click OK.
10
Advertisement
Table of Contents
