Safety Measures - LauraStar BORK i810 User Manual

SAFETY MEASURES

• The device is intended solely for private use. • The device represents a source of high
• Use the device only indoors and only for ironing temperature. When using the device, keep your
of textiles in compliance with this manual. hands and body at a distance from the soleplate
• Do not immerse the device and its parts into water and steam jets. Contacts with metal parts
or any other liquid. of the device, hot water or steam can cause
• The device shall be plugged in an outlet burns. Be careful in the course of iron installation
completed with grounding means. on the stand.
It is recommended to use protective disconnection • Stay at the distance from the device while
devices (PDD). unscrewing its covers.
• Do not use portable sockets, multi-outlet units • Do not leave the device unattended when
or any other extension cords. The power plug shall it is turned on.
be accessible easily in case of an emergency. • Turn the device off before its connection
• The iron soleplate and the steam jet become or disconnection. Be sure to let the device cool
very hot. It shall be prohibited to steam clothes down for at least 2 hours before its draining.
on people. • Keep the device out of reach of children.
• Do not direct the iron on people or animals. • The device is not intended for use by children
and people with limited physical, sensory
22
or mental abilities or people not having have
sufficient experience, except when they stay
under supervision of a person responsible for their
safety.
• The device put in the standby mode or non-used
by anyone shall always be kept on a flat and stable
stand. Do not place the iron on the ironing table
cover or on personal belongings. Place the iron
on a special stand only in order to avoid the risk
of a fire.
• Be careful when removing the protective soleplate
cover after device application. Place the hot
soleplate on a heat-resistant mat.
• Cleaning, maintenance and servicing of the device
shall be carried out only when it is turned off
and has been cooled for at least 2 hours.
• Unscrew plugs carefully: the remaining steam will • Do not turn other power-consuming devices
begin to be discharged under pressure after a few on simultaneously in order to avoid overloading
turns. of the electricity supply network.
• Do not open the drain plug or the steam
• The device cable shall not come into contact
with hot surfaces. Cool the device completely generator plug in the course of device operation.
prior to its storage. Carefully unscrew the drain plug/cover
• Do not use the device if it has been damaged of the steam generator after the device has cooled
by falling, if there are visible signs of damage down completely: the remaining steam under
or if defects are visible on the steam hose pressure will begin to be discharged after a few
or the electrical cable. turns.
• Do not attempt to repair the device on your own! • Do not insert foreign objects in holes
• Do not turn the device on without filling it with of the device. In case of water ingress or a contact
water. of internal device elements with foreign objects –
• Wipe external parts of the device with a soft, damp unplug the plug from the outlet immediately.
cloth. Do not use solvents, oil or abrasive cleaners. • Place the electrical cable and steam hose
in a way that they cannot be removed or hooked.
Make sure that no one trips over cables.
• If it is necessary to avoid the risk of electric
discharge – do not pull the cable in the course
of unplugging from the outlet; hold it firmly
and remove the power plug.
• Do not dispose of the used device together
with other household waste!
23