Siemens SCALANCE X-200 Series Compact Operating Instructions page 88

Certifications and approvals
6.1 Notes on the CE Mark
● "Approval of SIMATIC/ SIMATIC NET Products for Direct Installation in Ex-Zone 2"
ATEX code:
II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
The product meets the requirements of the standards
● EN 60079-15 : 2005 (electrical apparatus for potentially explosive atmospheres; Type of
● and EN 60079-0:2006
FM approval
The product meets the requirements of the standards
● Factory Mutual Approval Standard Class Number 3611
● FM Hazardous (Classified) Location Electrical Equipment:
FDA and IEC approvals
The following products meet the FDA and IEC requirements listed below.
● SCALANCE X204-2LD
● SCALANCE X206-1LD
● SCALANCE X212-2LD
Figure 6-1
Note for Australia
The product meets the requirements of the AS/NZS 2064 standard (Class A).
UL Approval for Information Technology Equipment
Underwriters Laboratories (UL) complying with Standard UL 60950-1
Report Number E115352
UL Approval for Industrial Control Equipment
Underwriters Laboratories (UL) complying with Standard UL 508
Report Number E85972
88
protection "n")
Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 A and
Non Incendive / Class I / Zone 2 / Group IIC / T4
FDA and IEC approvals
Compact Operating Instructions, 12/2010, A5E00813159-11
SCALANCE X-200