Logo - Canon LV-WU360 User Manual

Advanced

Logo

Logo (including Logo and Logo Passcode lock setup)
You may use this function to select Logo screen, Logo
Passcode lock, change power on password, and set
up default logo screen.
1) Press button to select [Logo] menu.
2) Press <OK> button.
3) Press button to select required items.
Logo Select
Select this to set up the logo screen when power on
your projector:
Canon(default)....
Display factory default logo screen.
User*...... ..Display capture logo screen.
Off......
.....Display countdown logo screen.
*Only for LV-WX370 / LV-X350
Capture(LV-WX370 / LV-X350)
Enable us to capture images beeing projected and use it for a startup display or interval of presentattions.
Upon captureing the projected image, press OK button, then a confirmation box appears, Select
Yes to capture it .
After capturing the projected images,go to "select a logo" , and set it to "User".Then,the captured
image is displayed when the projector is turned on next time.
Logo Passcode lock
LOGO Passcode lock
This function helps preventing unauthorized personnel from changing the Logo screen.
Off......The Logo screen may be changed with the Logo menu..
On.... ..You may not alter the logo screen without the Logo
To change the Logo Passcode protection, press OK key, and the Logo Passcode change popup
dialog box prompts. Follow stepsbelow to enter a logo screen password.
·
Press arrow button to select a number, then press OK button to enter it and move the
cursor.The number you typed is displayed as " * ". To edit number you have entered, press
MENU button to move the cursor to the number you want to change, press
select the correct one.
·
Repeat this step to type in a 3-digit number.Move the cursor to SET after you have typed the
3-dit number. Press OK button.
·
If the password is invalid, the password displayed as " *** " will be in red. Please try again with
a valid one.
·
After you have entered valid logo screen Passcode, you may pressbutton to toggle
switch Off and On.
Logo Passcode Change
You may change the Logo Passcode to any 3-digit number you like. Press OK key to select Logo
Passcode change. The Logo Passcode change dialog box prompts, press arrow button to give
a valid new code. The New Logo Passcode dialog box prompts. Set up a new Logo Passcode,
check contentscontained in the dialog box, select Yes and the new password is set now.
Please remember your new password and keep it safe.
To cancel the logo pass code, set the factory default settings.
Logo menu
Advanced
Note:
● After changing the Logo Pass-
code to a new number, please
remember it and keep it safe
The Logo Passcode cannot
be changed again if the new
password is lost or forgotten.
Passcode
.
67
Logo
Logo select Canon(default)
Capture
Logo Passcode lock
Logo Passcode change
button to
Off