Table of Contents
Advertisement
Network control
Network Display
When the input signal source is chosen as the LAN, the network will be used to project computer
image.
After entering the IP address of the projector in the web page to the main interface, click "Down-
load",and download the corresponding PwPresenter software with your projector.
Click
the icon to enter into pwPresenter software.
Windows Firewall
The following alert may be displayed the first time you start the software, depending on your Windows
Firewall settings.
To enable communication with projectors, select all check boxes and click the [Allow access].
To change the settings after closing the alert, open the [Start] menu and select [Control Panel] > [System
and Security] > [Windows Firewall] > [Allow an app through Windows Firewall].
Select [pwpresenter.exe] in the list of allowed apps and features, and then select each check box.
82
Advertisement
Table of Contents
