3.2.5
Mounting equipment set
Multiplex drain/overflow functional unit
Requirements:
The overflow and drain units are installed on the bathtub.
n
The connection between overflow and drain has been made.
n
If the wastewater pipe only has a diameter of 40 mm, cut off drain
elbow.
Push union nut, sliding ring and seal onto the drain elbow.
Screw the union nut on the drain unit.
Align the odour trap in such a way that the drain elbow can be con-
nected to the wastewater pipe.
Turn the drain at the joints until the required position has been
reached.
Push wastewater pipe in the drain elbow.
The equipment set is not included in the scope of delivery
and must be purchased separately.
Handling
14 from 17