Table of Contents
Advertisement
3.2
Assembly
3.2.1
Mounting overflow
3.2.2
Mounting the drain
Multiplex drain/overflow functional unit
Proceed as follows to the mounting of the overflow:
Fit profile seal in the overflow unit.
Push the rubber sleeve onto the overflow unit pipe until the lower
edge is flush with the edge of the overflow pipe.
Place the O-ring in the annular gap of the fixing flange.
Hold the overflow unit on the overflow opening of the bathtub from
the outside.
Screw the fixing flange into the overflow unit by hand.
Pliers or other tools may damage the fixing flange. Only turn the
fixing flange by hand.
Proceed as follows to mount the drain:
Handling
11 from 17
Advertisement
Table of Contents
