Toshiba RAV-RM2801DTP Series Service Manual page 98

4-3 Remove ferrite core which is set in earth lead of fan motor and bundle extra length
[Step1]
Remove the earth screw from metal plate.
[Step2]
Cut the tie band attached in ferrite core and remove a screw which is fixed the ferrite core.
[Step3]
Unwind the earth lead from ferrite core and take off ferrite core.
Notice : Keep the ferrite core. Because the ferrite core is used in motor lead later
[Step4]
Tighten the earth screw.
[Step5]
Bundle up the extra earth lead by folding in half at four times.
[Step6]
Tie the extra earth lead by tie band.
Step1
Step2
Step3
Step2
Step6
- 98 -
Step4
Step5