Replacing The Fuses (Models 22973 And 22974); Drive System Maintenance; Servicing The Tracks - Toro TRX-16 Operator's Manual

Trencher
Hide thumbs Also See for TRX-16:
Table of Contents

Advertisement

Replacing the Fuses
(Models 22973 and 22974)
There are 4 fuses in the electrical system. They are
under the control panel on the left side
Start Circuit
Charge Circuit
Cooler fan Circuit
Headlight (optional)
Figure 43
1. Fuse block
Drive System
Maintenance
(Figure
43).

Servicing the Tracks

30 amp
25 amp
Cleaning the Tracks
15 amp
15 amp
Service Interval: Before each use or daily
Check the tracks for excessive wear and clean them
periodically. If the tracks are worn, replace them.
1.
2.
3.
g015381
Important:
water to wash only the track area. Do not use
a high-pressure washer to clean the rest of the
machine. High-pressure washing can damage the
electrical system and hydraulic valves or deplete
grease.
Important:
wheels and the drive sprocket
road wheels should rotate freely when clean.
1. Road wheels
2. Drive sprocket
34
Park the machine on a level surface, engage the
parking brake, and lower the hydraulic lift.
Shut off the engine and remove the key.
Using a water hose or pressure washer, remove
dirt from each track system.
Ensure that you use high-pressure
Ensure that you fully clean the road
Figure 44
(Figure
44). The
g007832
3. Track

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Trx-20Trx-262297222972g2297322973g ... Show all

Table of Contents