Toro TRX-16 Operator's Manual page 14

•
To turn right, rotate the traction control clockwise
(Figure 9).
•
To turn left, rotate the traction control
counterclockwise (Figure
•
To stop the machine, release the traction control
(Figure 6).
Note:
The farther you move the traction control in
any direction, the faster the machine moves in that
direction.
Hydraulic-Lift (Boom Elevation)
Lever
To lower the boom, slowly move the lever forward
(Figure 11).
To raise the boom, slowly move the lever rearward
(Figure 11).
Figure 9
10).
Figure 10
g008131
1. Lower the boom
Boom-Elevation Lock
The boom-elevation lock secures the boom-elevation
lever so that you cannot push it forward. This helps
to ensure that no one accidentally lowers the boom
during maintenance. Secure the boom with the lock
g008132
anytime you need to stop the machine with the boom
raised.
To set the lock, lift up on it so it clears the hole in the
control panel and swing it to the right in front of the
boom elevation lever, pushing it down into the locked
position (Figure
1. Boom-elevation lever
14
Figure 11
2. Raise the boom
12).
Figure 12
2. Boom-elevation lock
g007802
g007803