Key Switch - Toro TRX-16 Operator's Manual

Key Switch

Recoil-Start Machines
The key switch has 2 positions: O
to Starting the Engine (page
Electric-Start Machines
The key switch has 3 positions: O
Refer to Starting the Engine (page
Throttle Lever
Move the control forward to increase the engine speed
and rearward to decrease the engine speed.
Choke Lever
Before starting a cold engine, move the choke lever
forward. After the engine starts, regulate the choke
to keep the engine running smoothly. As soon as
possible, move the choke lever all the way rearward.
Note:
A warm engine requires little or no choking.
Hour Meter
When the engine is off, the hour meter displays the
number of hours of operation that have been logged
on the machine.
Reference Bar
When driving the machine, use the reference bar
as a handle and a leverage point for controlling the
machine. To ensure smooth, controlled operation,
do not take both hands off the reference bar while
operating the machine.
and R . Refer
FF UN
17).
, R , and S
FF UN TART
17).
Traction Control
.
1. Reference bar
2. Traction control
•
To move forward, move the traction control forward
(Figure 7).
•
To move rearward, move the traction control
rearward (Figure
Important:
When reversing, look behind you
for obstructions and keep your hands on the
reference bar.
13
Figure 6
Figure 7
8).
Figure 8
g008128
g008129
g008130