Britax GROW WITH YOU CLICKTIGHT Series User Manual page 14

Britax Child Safety, Inc.
Lower Anchors with CLICKTIGHT
Before you begin:
• Check that your vehicle has lower anchors�
Use the vehicle belt (not lower connectors) for
harness mode installations with children who weigh
more than 40 lbs (18�1 kg)�
• Check that your vehicle has a top tether anchor�
Britax recommends that the top tether be used at all
times when installing the child seat� Using the top
tether will improve the stability of your child seat and
reduce the risk of injury� Check your vehicle owner's
manual for tether anchor locations�
• Loosen the tether and place it over the child seat
back to keep it from becoming pinned between the
child seat and vehicle seat during installation�
• Adjust the child seat to desired position and place
forward facing on the vehicle seat�
1� Release the buckle and
open the CLICKTIGHT
to access the lower
connectors�
a� Locate the two slots
in the CLICKTIGHT
cover�
b� Squeeze the
CLICKTIGHT release
levers�
2� Route the lower connector
strap along the green
belt path and firmly press
the lower connectors
onto their adjacent lower
anchors� A click confirms
attachment�
NOTE: Verify that the strap
is not twisted.
3� Pull the end of the lower
connector strap to remove
slack�
IMPORTANT:
Overtightening the
webbing may prevent the
CLICKTIGHT from properly
securing�
12