Generator Cover - KYMCO MXU 500i 2018 Service Information

6.Engine MXU 500i
MXU 500i/700i

Generator Cover

SAFETY FIRST: Protective gloves and eyewear are recommended at this point.
Removal
Generator Cover
Remove the right side cover and right mudguard. See the Side Covers and Mudguards and
Footrests topics for more information.
Drain the coolant. See the Coolant topic for more information.
Drain the engine oil if the water pump is to be removed. See the Engine Oil topic for more
information.
Remove the water pump. See the Water Pump topic for more information.
Remove the recoil starter. See the Recoil Starter Cover topic for more information.
Trace the wires up from the generator cover.
Unplug the 2-pin ignition pulse generator / crank position sensor connector.
Unplug the 4-pin stator connector.
6-101