Camshaft Installation - KYMCO MXU 500i 2018 Service Information

5.Engine MXU 700i
MXU 500i/700

Camshaft Installation

SAFETY FIRST: Protective gloves and eyewear are recommended at this point.
Installation
Align the "T" mark on the flywheel with the index mark on the crankcase cover. This shows
the piston is at Top Dead Center (TDC). For more information on setting the piston to TDC
see the Rocker Cover topic.
Apply molybdenum oil to the camshaft lobes, the journal holders in the camshaft holders
and the cylinder head.
Molybdenum oil: a mixture of molybdenum grease and fresh engine oil in a 50:50 ratio.
5-57