Delta Foul V3
1.0
Foul V3 Overview
The Delta Foul V3 is a packaged pump station designed to collect foul water. Typically, the Foul V3 would be used to
collect and discharge foul water from a basement fitted with a bathroom and utility room. This pump station is not
designed to collect ground water from a cavity membrane system (see Delta Dual V3 - DMS 164). For kitchen
applications we recommend fitting a grease trap prior to the pump station.
The pump station has been specifically designed for below ground applications. The chamber is manufactured from HDPE
and when installed correctly, it is able to withstand hydrostatic forces encountered in high water tables.
The pump station is delivered as a complete package including all internal pipework and a D10SA foul vortex pump.
It is designed to be installed by contractors with competent building, plumbing and electrical skills.
An AlertMaxx2 (DMS-299) is offered as a recommended extra to alert the property occupant when the water level in the
chamber becomes too high. A Hi-PowerMaxx (DMS-364) is recommended to power the pump during power outage.
Please see section 2.1 for more details about optional extras designed for the Foul V3 pump station.
2.0
Parts Included
Chamber
902 x 800mm deep
2.1
Optional Extras
AlertMaxx2 High Level
Alarm (DMS-299)
4
2" Internal Pipework
Hi-PowerMaxx Battery
Backup (DMS-364)
D10SA Pump
(DMS-120)
2" Discharge Pipework and
various fittings
(see page 5)
2" Vent, Cable Duct &
Discharge Male Iron
for temp. site installation