Section G - Installing Pump And High Level Alarm In Chamber - Delta Membranes Delta Foul V3 Installation Instructions Manual

11.0 Installation of Chamber - Section G
Installing pump and high level alarm in chamber
27
Fill chamber half full with water.
29
Tighten the two screws on the DC65 to seal the
pipework.
28
Slide the DC65 over the discharge arm and lower the
pump in to chamber to release any trapped air. Slide the
DC65 up to join the manifold to the discharge arm.
30
When installing a high level alarm, refer to the high level
alarm installation instructions.
Delta Foul V3
19