Table of Contents
Advertisement
Delta Foul V3
11.0
Installation of Chamber - Section C
Connecting discharge, cable duct and vent
9
Wrap the thread on a high pressure male iron with PTFE
tape.
11
Apply high pressure glue around the first 20mm of the
external face of the discharge, cable duct and vent pipe
and internal side of their respective male iron.
12
10
Screw the high pressure male iron into the socket.
12
Push discharge, cable duct and vent pipe into their
respective male iron, twisting the pipe as it is pushed into
the male iron to remove any trapped air.
Advertisement
Table of Contents
