Advertisement
TECHNO HAZE USER GUIDE
Introduction
The TECHNO-HAZE has been designed to produce a perfect translucent
environment for today's intelligent lighting effects.
Furthermore, this unique design is guaranteed to give the user maximum
reliability thanks to features such as the "Low fluid cut off system",which
protects the pump in the event of
the
Creating the perfect ambient haze relies heavily on the correct particle size
and dispersion. The TECHNO-HAZE produces this by vapourising the special
working fluid at very precise temperature in a high mass heater block which
contains a cuperous helicoil of 3 metres length.
The product of this process is injected into the uniquely designed JEM
'Expansion Chamber' where it is mixed with a turbulent airflow and projected
from the machine as an optically translucent haze at 1200 ft / minute (exit
velocity).
The Techno-Haze uses a 'Direct Thermal Protection Device' to ensure maximum
overheat protection and therefore greater reliability.
Features
•
"DTP" Safety system
•
SMD electronics
•
Low fluid cut off system
•
Variable output remote
•
2.5 Litre fluid capacity
•
Expansion chamber
•
High power fan
PAGE 2
MARTIN MANUFACTURING (UK) PLC
machine running out of fluid.
TECHNO HAZE USER GUIDE
Remote Control Functions
•
OUTPUT LEVEL CONTROL:
When starting the machine for the first time,
use the prime button as described on page 5 para 2. During normal opera-
tion, the output control should be set between 4 and 10.
give the output density you require.
Setting the level control to minimum will switch off the output
•
POWER LED: This indicates that the machine is powered and that the
remote is connected.
www.audiovias.com
MARTIN MANUFACTURING (UK) PLC
Use the control to
PAGE 7
Advertisement
