Gas Hose Passage Way - Samus SM450 Series User Manual

GAS HOSE PASSAGE WAY

Figure-20
Figure-21
Figure-22
GB
1. Connect the appliance to the gas pip-
ing tap in shortest possible route and in a
way that ensure no gas leakage will occur.
2. In order to carry on a tightness and
sealing safety check ensure that the knobs
on the control panel are closed and the gas
cylindir is open.
3. While performing a gas leakage check,
never use any kind of lighter, match, ciga-
rette or similar burning substance.
4. Apply soap bubble on the connection
points. If there is any kind of leakage then
it will cause bubbling.
5. While inserting the appliance in place
ensure that it is on the same level with the
worktop. If required adjust the legs inorder
the make level with the worktop.
6. Use the appliance on a level surface
and in a well ventilated environment.
23