Table of Contents
Advertisement
ADVANCED COMMUNICATIONS & SENSING
15
Registers Display Window
As outlined in Section
enabled from either the Menu or Windows tool bar, provides details of the status of all configuration registers
that are documented in the SX8724S datasheet.
Whenever the contents of a register are changed in the main GUI window, the corresponding register
displays the new contents of the register(s), highlighting changed contents in red for a period of
approximately 5 seconds before reverting back to black.
The register window is displayed below in
16
Verification Mode Window
When no board is connected to the PC, launching the application results in the GUI display being grayed out
and the user is unable to enter data.
By depressing the <CTRL>+<ALT>+<N> keys of the PC keyboard simultaneously, the user can write to the
configuration registers to verify propose settings, as well as load and save configuration files (*.cfg).
ACS - Revision 1.0
© Semtech Corp.
13.2. Window Tool Bar
Figure
Figure 27. SX8724x Registers Display Window
May 2011
Evaluation Kit for SX8724S Data Acquisition System
the SX8724x GUI has a show registers utility that, when
27.
Page 34
SX8724SEVK
USER GUIDE
www.semtech.com
Advertisement
Table of Contents
