Table of Contents
Advertisement
ADVANCED COMMUNICATIONS & SENSING
14
ZoomingADC Data Display Window
The windows described in this section are only accessible for enabled configurations in the GUI.
14.1
ZoomingADC data display panel
By default, the samples are displayed in the panel in a range from -32768 to 32767 LSB.
Various options allows the user to display the small signals as described below. Note that the following panel
options are available in the small display chart described in
14.1.1 Zoom (left click on the panel)
If the user draws a rectangle in the graphic and then release the mouse button the graphic will zoom the
signal inside the rectangle.
14.1.2 Zoom and Pan Via Mouse Scroll
The mouse scroll (if available) can be used to pan or zoom. It zooms in when you spin the scroll towards you
and zooms out when you spin it towards the display panel. Holding it pushed also enables the pan command.
To reset the display to default range, the right button of the mouse provides the Undo All Zoom/Pan operation
(see
Section
14.1.3.)
ACS - Revision 1.0
© Semtech Corp.
Figure 26. ZoomingADC Data Display Window
May 2011
Evaluation Kit for SX8724S Data Acquisition System
13.7. Display
Page 31
SX8724SEVK
USER GUIDE
Chart.
www.semtech.com
Advertisement
Table of Contents
