ADVANCED COMMUNICATIONS & SENSING
17.2.4 Sensor Connection to the Board
The picture below shows how to connect the sensor on the evaluation board, each red point represents a
connection.
ACS - Revision 1.0
© Semtech Corp.
4: Vout-
3: Vb
2: Vout+
1: GND
PIN 1
Figure 31. Connection on the SX8724SEVK Evaluation board
May 2011
Evaluation Kit for SX8724S Data Acquisition System
Page 38
SX8724SEVK
USER GUIDE
www.semtech.com