Table of Contents
Advertisement
ADVANCED COMMUNICATIONS & SENSING
GETTING STARTED
1
Introduction
This section describes a typical configuration for operating the evaluation board of the SX8724S with
ZoomingADC.
The SX8724S is a signal conditioner based on Semtech's ultra low power ZoomingADC™ technology. It
directly connects most types of miniature sensors with a general purpose microcontroller.
The SX8724SEVK is a USB based evaluation tool designed to allow simple and easy evaluation of the
suitability of the SX8724S device for a given application.
The analog input signal can be entered either in differential or single ended. Refer to the datasheet for the
impact of driving an analog input in single or in differential.
2
Evaluation Kit Contents
The SX8724SEVK evaluation kit consists of:
a "Read me first" sheet
an Evaluation Board
one USB cable
a CDROM containing:
• Software Installer including MS .NET framework 3.5 and USB drivers
• SX8724SEVK User Guide (this document)
ACS - Revision 1.0
© Semtech Corp.
May 2011
Evaluation Kit for SX8724S Data Acquisition System
Page 4
SX8724SEVK
USER GUIDE
www.semtech.com
Advertisement
Table of Contents
