Main Window; Menu Tool Bar - Semtech SX8724SEVK User Manual

ADVANCED COMMUNICATIONS & SENSING
13

Main Window

13.1

Menu Tool Bar

The Menu tool bar contains four drop down menus, File Menu, Action Menu, Tools Menu and Help Menu.
13.1.1 File Menu
Connect / Disconnect allows the connection or disconnection of the board from the host PC. This
functionality can also be accessed through the short cut buttons of the Window Toolbar (see
Window Tool
Open Config... allows for the opening of SX8724xEVK configuration files (.cfg). This is implemented
through a standard Windows file dialog box and may also be accessed through the short cut buttons of
the Window Toolbar.
Save Config allows for SX8724xEVK configuration files (.cfg) to be saved. This is implemented through a
standard Windows file dialog box. The default file name is the last saved configuration file.
Save Config as... prompts for a new file name before saving, allowing for multiple configuration files to be
saved and may also be accessed through the short cut buttons of the Window Toolbar.
Exit closes the application.
13.1.2 Action Menu
Reset resets the SX8724S configuration registers to the default values by writing the SX8724S reset
register.
Refresh reads all SX8724S registers and updates the GUI controls.
Show registers toggles the SX8724S Registers display window and may also be accessed through the short
cut buttons of the Window Toolbar. The register display window indicates the status of SX8724S
ACS - Revision 1.0
© Semtech Corp.
Bar).
Figure 14. File Menu Options
May 2011
Evaluation Kit for SX8724S Data Acquisition System
Page 20
SX8724SEVK
USER GUIDE
13.2.
www.semtech.com