YES 45 FS/FI Storefront System
STEP 19
INSTALL GLASS
Determine the glass size:
-Carefully install the glass into the opening: bring the lite
up and into the deep pocket first and then rotate the other
end in place.
-Carefully lift lite of glass, install setting blocks at quarter
points of horizontal D.L.O. or according to engineering
calculations.
-Make sure the glass is engaged with all setting blocks.
See Detail 34.
*Note: For 1" glazing, glass bite is 7/16".
Effective Date: May 29, 2018 | 02-4001-09
GLAZING
Detail 34
1/4" Glazing Shown
1" Glazing Similar
Page-29