Prepare Door Jambs - Ykk ap YES 45 FS Installation Manual

YES 45 FS/FI Storefront System
STEP 12 (Continued)

PREPARE DOOR JAMBS

Prior to snapping the assembled frames into the door jamb, the end of the sill flashing needs
to be sealed to the door jamb.
-Apply and tool sealant to all sill flashing to door jamb joints.
-Apply sealant to completely fill the door jamb cavity and ramp the sealant down onto the sill
flashing.
See Detail 22.
Refer to the Entrances Installation Manual for door installation instructions.
Effective Date: May 29, 2018 | 02-4001-09
FRAME INSTALLATION
Ramp Sealant
Down Onto
Sill Flashing
Detail 22
Door
Jamb
Seal Jamb
To Sill Flashing
E9-1068
Sill Flashing
Page-21