STEP 18
INSTALL INTERIOR GLAZING GASKETS
The interior glazing gaskets must be installed prior to the glazing process.
-Using a small brush clean out any dirt that may have accumulated in the gasket reglets.
Vertical glazing gaskets must be installed first:
-Cut vertical glazing gaskets to Daylight Opening plus(+) 3/16" for each foot of length.
-Insert the gasket into the reglet at each end first, and then insert the gasket at the
midpoint of the opening.
-Push the gasket into the reglet starting at the midpoint and work towards each end.
Install horizontal glazing gaskets next:
-Cut horizontal glazing gaskets to Daylight Opening plus(+) 3/16" for each foot of length.
-Apply sealant to each end of the horizontal glazing gasket prior to inserting into the reglet.
-Insert the gasket into the reglet at each end first and push each end tight against the
vertical gasket.
-Then insert the gasket at the midpoint of the opening and push the gasket into the reglet
starting at the midpoint and work towards each end.
-Tool the excess sealant at the gasket corners to ensure a watertight seal.
See Detail 33.
Page-28
YES 45 FS/FI Storefront System
GLAZING
Apply Sealant
To Horizontal
Gasket Ends
Glazing
Gasket
Detail 33
YES 45 FI
With 1" Glazing Shown
Other Systems Similar
Glazing
Gasket
Tool Sealant at
Gasket Corners
02-4001-09 | Effective Date: May 29, 2018