Service Settings - VCS Videojet Series Manual

Configuration with web browser

Service settings

With these settings, you can integrate the
ting network.
Network settings IP address:
Enter the desired IP address of the device here. The desired IP
address must be valid for the network.
Attention!
If you change the IP address and transmit the new configuration to
the
address.
Subnet mask:
Enter the corresponding subnet mask here if the device is to com-
municate via a subnet.
Gateway IP address:
Enter the corresponding IP address here if the device is to indepen-
dently set up a connection from the local network. Otherwise the
field can be left blank (0.0.0.0).
48
VideoJet , the device can then only be selected via the new
VideoJet into an exis-
VideoJet