Commissioning With Terminal Program - VCS Videojet Series Manual

Installation
Commissioning
with terminal program
Data terminal You can connect a data terminal to the
unit into operation and for the local control. The data terminal con-
sists of a computer with a terminal program. For the connection use
a serial standard cable.
You can use e.g. the Windows application HyperTerminal as termi-
nal program.
Note
Information on the installation and use of HyperTerminal can be
found in the documentation or in the online Help for Windows.
First, disconnect the
Connect the sub-D jack CONTROL TERMINAL of the
to a free serial port of the computer.
Configuring the The transmission parameters have to match for communication
terminal program between terminal program and
for the terminal program:
24
VideoJet from the network.
19,200 bits/s
8 data bits
No parity check
1 stop bit
Protocol Xon/Xoff
VideoJet for putting the
VideoJet
VideoJet . Set the following values
VideoJet