Switching On / Switching Off - VCS Videojet Series Manual

Switching on / Switching off

Mains connection The scope of supply of the
pack.
Attention!
Use only the plug-in power supply unit supplied for operation of the
VideoJet . Take appropriate measures or install the appropriate
equipment to prevent surge voltages, interference voltage peaks or
power failures in the mains supply from reaching the server.
Connect the
the other connections have been made.
The
nected the plug-in power supply unit to the
the plug of the plug-in power supply unit into a plug socket, the
server is ready for operation.
Push the plug of the power supply unit cable into the jack POWER
until it latches.
Plug the plug-in power supply unit into a fused mains power plug
socket. The green LED on the front of the
the server is ready for operation.
When the network connection has been correctly made, the green
LED on the rear side also lights up. The flashing yellow LED signals
the transport of data packages via the network.
VideoJet
VideoJet includes a plug-in power
VideoJet to the mains power supply only when all
VideoJet has no mains power switch. When you have con-
Installation
VideoJet and inserted
VideoJet lights up and
23