Configuration with web browser
General procedure for configuration
The configuration pages allow you to conveniently configure the
VideoJet . When you call up one of the configuration pages, you
will see the current settings. You can change the settings by enter-
ing new values or by selecting a predefined value from a list box.
All configuration settings are stored in the non-volatile memory of
the
a power failure.
Edit settings
If applicable, click on the button Configuration to switch to the
configuration pages. Page Identification is displayed.
Click in a text field and enter new values or texts, or
click on a list field to select a different setting.
Execute changes
After every change, click on the corresponding button Set to trans-
mit the change to the
Attention!
Save every setting with the button Set. Clicking the button Set only
saves the settings in the according field (blue frame). All other set-
tings remain unconsidered.
'Help' pages
Each configuration page offers the possibility of calling up informa-
tion about the parameters on the page. At the bottom of each page
you will see the link Help on this page?
Click on the link to open the 'Help' page.
30
VideoJet so that the settings are retained even in the event of
VideoJet where it is saved.
VideoJet