Alarm Settings - VCS Videojet Series Manual

Alarm settings

On this page you can configure the behaviour of the
event of an alarm and the alarm triggering events.
Alarm Sources You can select and activate the sources for alarms. In the event
of an alarm, the symbol corresponding to the alarm source is dis-
played white in the video image.
Video loss alarm: (transmitter only)
The input signal from the camera is monitored. If no signal is
received, the
Motion alarm: (transmitter only)
The
record changes in the video signal on the basis of image process-
ing. These changes are mainly initiated by motion in the field of
vision of the camera. The sensitivity of the video sensor can be
adjusted so that an alarm is only triggered after exceeding a preset
threshold.
Select On to trigger an alarm in the event of movements. Select Off
if you do not wish to permit a motion alarm.
VideoJet
VideoJet triggers the alarm.
VideoJet has an integrated video sensor which is able to
Configuration with web browser
VideoJet in the
41