Honda Fit EV Owner's Manual page 234

Wheel Label
■
Distributing the Sealant in the Tire
Speed Limit Label
13. Apply the wheel label to the flat surface of
the wheel.
u The wheel surface must be clean to
ensure the label adheres properly.
1. Apply the speed limit label to the location
as shown.
2. Drive the vehicle for about five minutes.
u Do not exceed 50 mph (80 km/h).
3. Stop the vehicle in a safe place.
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
1Distributing the Sealant in the Tire
Stop and recheck the air pressure after every five
minutes of driving as necessary until you reach the
nearest service station where you should have the tire
permanently repaired or replaced.
Continued 233