Honda Fit EV Owner's Manual page 199

uuMaintenance Under the HooduCooling System
■
Radiator
Radiator Cap
198
1. Make sure the motor and radiator are
cool.
2. Turn the radiator cap counterclockwise and
relieve any pressure in the coolant system.
Do not push the cap down when turning.
3. Push down and turn the radiator cap
counterclockwise to remove it.
4. The coolant level should be up to the base
of the filler neck. Add coolant if it is low.
5. Put the radiator cap back on, and tighten it
fully.
6. Pour coolant into the reserve tank until it
reaches the MAX mark. Put the cap back
on the reserve tank.
1Radiator
WARNING
3
Removing the radiator cap while the motor
is hot can cause the coolant to spray out,
seriously scalding you.
Always let the motor and radiator cool
down before removing the radiator cap.
NOTICE
Pour the fluid slowly and carefully so you do not spill
any. Clean up any spills immediately; they can
damage components in the motor compartment.