uuOperating the Switches Around the Steering WheeluTurn Signals
Turn Signals
Right Turn
Left Turn
Light Switches
High Beams
Flashing the high beams
Low Beams
Turns on parking, side marker,
tail, and rear license plate lights
Turns on headlights, parking, side
marker, tail, and rear license plate
lights
112
The turn signals can be used when the power
switch is in ON
w .
(
Rotating the light switch turns the lights on
and off, regardless of the position of the
power switch.
■
High beams
Push the lever forward until you hear a click.
■
Low beams
When in high beams, pull the lever back to
return to low beams.
■
Flashing the high beams
Pull the lever back, and release it.
1Light Switches
If you remove the key from the power switch while
the lights are on, a chime sounds when the driver's
door is opened.
Do not leave the lights on when the power system is
off, because it will cause the 12 volt battery to
discharge.