Honda Fit EV Owner's Manual page 152

POWER/CHARGE Gauge
Start-up point
■
Starting to Drive
1. Keeping your right foot on the brake pedal, release the parking brake. Check that
the brake warning indicator has gone off.
2. Put the shift lever in D . Select
(
3. Gradually release the brake pedal and gently depress the accelerator pedal to pull
away.
3. Turn the power switch to START
without depressing the accelerator pedal.
u The READY TO DRIVE message appears
on the multi-information display and a
buzzer sounds.
u The POWER/CHARGE gauge pointer
goes to the start-up point.
R when reversing.
(
uuWhen DrivinguTurning on the Power
e (
1Turning on the Power
The immobilizer system protects your vehicle from
theft. If an improperly coded key (or other device) is
used, the power system does not activate.
When you turn the power switch to ON
feel the brake pedal slightly sink down. This is
normal.
w ( , you may
151