Bulb layout
In the headlamp there are:
•
LED daytime running lights (lateral)
•
one low beam headlight bulb (upper);
•
one high-beam headlight bulb (lower).
CAUTION
LOOSEN THE SCREW (1) BEFORE ACTING ON THE SCREWS (2).
04_15
Front headlamp bulb replacement
•
Rest the vehicle on its stand.
•
Remove the upper fixing screws (2) of the front light dashboard
•
Turn the dashboard towards the front of the vehicle, unscrew the fixing
screws (3) of the headlamp cover (4) and remove it
High beam light bulb
•
Disconnect the connector (5) from the high beam bulb
•
Release the two ends of the retaining spring (6)
•
Pull the bulb (7) out of its fitting and change it
04_16
•
Install a bulb of the same type adequately
Low beam light bulb
•
Release the two ends of the retaining spring (8)
•
Pull the bulb (9) out of its fitting and change it
•
Install a bulb of the same type adequately
CAUTION
WHILE LOCKING THE DASHBOARD, TIGHTEN THE SCREW (1) ONLY AFTER
TIGHTEN THE SCREWS (2).
TIGHTENING TORQUE: 10 Nm (7.38 lb ft)
04_17
94