MOTO GUZZI MGX-21 2016 Owner's Manual page 33

BACK LIGHTING
This feature enables the adjustment of the intensity of the back lighting on three levels.
Once you have entered this function and each time the "MODE" selector is pressed
up or down, the following icons are cyclically displayed:
•
Minimum (a full notch)
•
Medium (two full notches)
•
Maximum (three full notches)
After the operation, with a short press of the "MODE" selector, the instrument panel
02_29
returns to the home screen.
CALIBRATION
Select the option from the configuration "MENU", access the CALIBRATION function.
A window with the message "CALIBRATING" appears at the bottom of the right display
when the CALIBRATION function is selected:
•
CALIBRATING
To calibrate the MGCT system (Moto Guzzi Traction Control), ride the vehicle on flat,
straight section of road for approximately 10 seconds in second gear and at a speed
of 30 +/- 2 km/h (18.64 +/- 1.24 mph) until the message "CALIBRATION" is no longer
02_30
shown on the display.
NOTE
ONCE THE MESSAGE 'CALIBRATING' CEASES TO BE DISPLAYED, STOP THE
VEHICLE, TURN THE IGNITION SWITCH OFF AND LEAVE OFF FOR AT LEAST
30 SECONDS TO COMPLETE THE CALIBRATION PROCEDURE.
THIS ALLOWS THE CALIBRATION TO BE STORED IN THE MEMORY.
NOTE
THE CALIBRATION OPERATION IS USED TO OPTIMISE THE MGCT FUNCTION
IN CASE OF A CHANGE IN TYRE TYPE.
33