Connecting The Q-Bus Cables - Digital Equipment VAX 4000 Model 500A Installation Manual

8.1 Connecting the Q–Bus Cables
1. Find the two Q–bus cables labeled BC04V–09. One end of each cable should
be connected to the expander.
2. Connect the free ends of those cables to the two Q–bus Out connectors on
your system.
a. Connect the plug end of one of the cables to connector J1.
4
4 0
M 9
b. Connect the socket end of the other cable to connector J2.
J2
J1
Feed Cables Under System
and Up Through Opening.
MLO-007131
49