4. Check the settings on the console module:
•
The Power-Up Mode switch should be set to Language Inquiry (uppermost
position, indicated by a human profile).
•
The Baud Rate Select switch should be set to the same rate you used for
your console terminal.
•
The Break Enable/Disable switch should be set to break enabled (up,
indicated by a | ).
Power-Up
Mode Switch
Baud
300___________0
600___________1
1200__________2
2400__________3
Baud Rate
4800__________4
Select Switch
9600__________5
19200_________6
38400_________7
Break Enable/
Disable Switch
5
MLO-007116
13