Digital Equipment VAX 4000 Model 500A Installation Manual page 28

3. Insert one end of the cable into the lower connector labeled J2 on the module.
1
V 1
L P
Bail
Latch
Secure the connection by pressing the bail latches until they snap into place.
4. Insert the other end of the cable into the printer, as described in your printer
documentation.
Follow the same procedure for connecting a second printer to the LPV11 module,
except insert the cable into the upper connector labeled J1 on the module cover.
24
J1
J2
Feed Cable Under System
and Up Through Opening.
MLO-007127