Table of Contents
Advertisement
2. Check the settings on each Integrated Storage Element (ISE):
•
The Write-Protect button should be out (write-enabled position).
•
The Run/Ready button should be in (ready position).
•
Verify that uniquely numbered bus node ID plugs are inserted into the
ISEs.
Bus Node
Run/Ready
ID Plug
Button
OR
Bus Node
ID Plugs
If a bus node ID plug is missing from an ISE, refer to your system
Operation manual for corrective action.
Write-Protect
Button
Note
MLO-007702
11
Advertisement
Table of Contents
