Canon iR1210 Installation Procedure page 9

6 Fitting the Toner bottle
1) Open the toner supply cover.
F6-1
2) Rock the new toner bottle five or six times to
distribute the toner evenly.
F6-2
3) Holding the toner bottle lever, insert the toner
bottle slowly into the machine as for as it will
go.
F6-3
4) Holding the toner bottle steady with one hand,
firmly and slowly pull the sealing tape tab with
the other hand to remove the sealing tape
completely. Throw the tape away.
F6-4
5) Holding the toner bottle lever, turn it
counterclockwise so that the
toner bottle aligns with the
machine [1]. Close the toner cartridge lever [2].
If you can't turn the toner bottle, please
push it into slot until stop and turn again.
Memo
Before
6) Close the toner supply cover.
– 9 –
∇
mark on the
mark on the
[1]
Complete
[2]
F6-5
F6-6