Section 2 Transmission Media and Components
•
Power taps can be simplified for systems that use single power supply.
shows the DeviceNet power tap components.
10 - 32 Grounding
Figure 19. DeviceNet Power Tap Components
Table 44
Conductor Description
Drain wire conductor
(stranded or solid)
9ARD000015-600
A connection to the shield or drain wire for grounding the network.
Stud or grounding
lists the specifications for the Internal Pass Through Conductor.
Table 44. Internal Pass Through Conductor Specifications
7 inches maximum of unshielded conductor. Maximum conductor
resistance is 4 milliohm (equivalent to 7 inches of 18 AWG).
Minimum conductor equivalent at any point is 18 AWG.
Drop Connector
Specification
Power Taps
Figure 19
51