ABB AC 800M Installation Manual page 25

Section 2 Transmission Media and Components
Table 9. General Specification for Physical Characteristics of Thick Cables
Physical Characteristics
Geometry
Overall braid shield
Drain wire
Outside diameter
Roundness
Jacket marking
Table 10. General Specification for Electrical Characteristic of Thick Cables
Electrical Characteristic
DCR (braid+tape+drain)
9ARD000015-600
Specification
Two shielded pairs, Common axis with
drain wire in center.
65% coverage. 0.12 mm (36 AWG)
tinned Cu braid minimum
(individually tinned)
#18 Copper minimum; 19 Strands
minimum (individually tinned)
0.410 inches (minimum) to 0.490
inches (maximum)
Radius delta to be within 15% of 0.5
O.D.
Vendor Name & Part #, and additional
markings
Specification
1.75 Ohms/1000 ft
(nominal @ 20° C (68° F))
Thick Cable
25